Press ENTER to search or ESC to close

Type DT

"Parking jack with side handle" designed square jacks Jacks and jockey wheels are partly completed machineries in compliance with Provisions of the Machinery Directive 2006/42/CE. The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the Provisions of the Machinery Directive, where appropriate.

Technical data and performance

Surface treatment
Note
Outer tube (in)
Max. static load (lb)
Screw stroke (in ±0.39)
Unitary weight (lb)
D - Total height when retracted (in)
E - handle lenght (in)
G - footplate dimension (in)
I (in)
On request
DT490
Square Jacks
Surface treatment red water based rust preventer
Note
Outer tube (in)☐ 2.36
Max. static load (lb)1764.00
Screw stroke (in ±0.39)13.78
Unitary weight (lb)15.44
D - Total height when retracted (in)22.05
E - handle lenght (in)6.89
G - footplate dimension (in)6.30
I (in)
On requestNo
DT496HE/Z
Square Jacks
Surface treatment cold-dip galvanized
Notegalvanized
Outer tube (in)☐ 2.36
Max. static load (lb)1764.00
Screw stroke (in ±0.39)13.78
Unitary weight (lb)17.64
D - Total height when retracted (in)22.05
E - handle lenght (in)6.89
G - footplate dimension (in)6.30
I (in)15.16
On requestYes

Drawings and other technical data

Request information form

To request a information fill the form below and we will answer as soon as possible.
The fields marked with * are mandatory

Description



DT490 Parking jack with side handle with total extension 13.78 in ±0.39 and 1764.00 lb Max. static load capacity
DT496HE/Z Parking jack with side handle with total extension 13.78 in ±0.39 and 1764.00 lb Max. static load capacity
I consent to the handling of my data as indicated in this information*